WAGNER Vehicle motorcycle fuel gas Tank Sealing Kit

wagners tank sealer
Now Only
Add to cart
  • Description
  • More

WAGNER single-component tank sealing resin seals tank interiors made of steel (also alloys), aluminum, stainless steel, copper, brass and plastics such as carbon, GFRP, Kevlar, polyester or vinyl ester. Even new tanks with smooth inner surfaces can be sealed with WAGNER single-component tank sealing resin. Note: WAGNER tank sealing resin cannot be used on tanks made of polyethylene or polypropylene, since these materials cannot be coated permanently.
WAGNER single-component tank sealing resin is resistant to leaded and unleaded fuel, ethanol/petrol blended fuels such as E5, E10 and E85, pure ethanol, pure petrol (gasoline), two-stroke mixtures, diesel fuel, aviation fuel, motor oil, transmission oil, hydraulic oil, mineral oil, synthetic oil, two-stroke oil, bright stock and additives, such as WAGNER Bactofin Stabilizer.
090 With your tank now completely sealed and through the continued use of Bactofin the fuel supply system of your vehicle will be completely protected for the future!

WAGNER Vehicle motorcycle fuel gas Tank Sealing Kit
 Consisting of:
1.  WAGNER Single-Component Resin for Tank Sealing
2.  WAGNER Rust Converter
3. WAGNER Rust Converter

For the long-term coating of tanks of a volume of up to 40 litres (without baffle plates) or 32 litres (with baffle plates)
WAGNER phosphating Rust Converter & Tank sealer


Phophatising WAGNER Rust Converter really works – rust is stopped immediately. And the corrosion-pitted, porous surface structure is chemically repaired at the same time – the treatment produces a firm metal surface that can easily be painted, coated, tin plated or even zinc plated. Complete derusting is superfluous!
WAGNER Rust Converter does not corrode aluminium or non-ferrous metals. Nor is soft solder or brazing solder affected in any way. When used as instructed, WAGNER Rust Converter is neutral on paint and rubber. In high concentrations, extended immersion or if used undiluted, some paints and types of rubber can be damaged if drops or splashes are not neutralised with water and washed off in time.
WAGNER Rust Converter works reliably even at temperatures as low as 0° Celsius and does not have to be warmed beforehand. WAGNER Rust Converter is easy to use, leaves no spots and can be disposed of via the sewage system.
The dark grey layer (phosphatisation) left by WAGNER Rust Converter on iron and steel effectively protects metal surfaces from rust. The protection can be made permanently by a suitable final protective treatment with a plastic coating, paint, resin, lacquer, tar, wax, tin or zinc.
Treatment with WAGNER Rust Converter improves the rust protection of the metal and the adhesion of the final protective treatment. On non-ferrous metal surfaces, such as aluminium or zinc sheet, WAGNER Rust Converter is suitable for priming bare metal surfaces (pre-etching). It is therefore also a good idea to treat new, rust-free metals with WAGNER Rust Converter.
WAGNER Rust Converter stops corrosion immediately; complete derusting is superfluous.
It also converts the rust into a non-corrosive metal compound.
WAGNER Rust Converter has a very low viscosity so that it penetrates all pores.
It forms a dark grey layer, ideal for final protective treatment.
Saves time and money, no derusting or sandblasting or priming is necessary.
WAGNER Rust Converter should be used only on surfaces that are free of oil and grease.
WAGNER Rust Converter is ready for use and easy to apply.then in the kit you also get the resin to completely seal your tank too!

 

Motorcycle motorbike gas fuel tank repair kit sealer

What you get!

this is the ultimate sealer having used Kreem and others that peel off with the new ethanol fuel leaving a horrendou mess in yoiur tank and instant rust from the water in the ethanol your tank then rusts if not already! this is the ONLY one i have used that works believe me- any questions call mike 01773835666

Single-Component Tank Sealing Resin
WAGNER fuel gas tank repair phosphating Rust Converter
WAGNER Motorcycle motorbike gas fuel  Tank Sealing Kit

Since the introduction of lead-free petrol (gasoline) unsealed fuel tanks have a higher tendency to rust, which presents a clear danger for fuel pumps, carburetors and fuel injection systems. However, petrol (gasoline) tanks are not the only ones at risk. Tanks in diesel vehicles and two-stroke vehicles rust through as well, and fuel tanks made of GFRP composite materials are at risk also as their surface starts to become porous and damp over time.
A tank inside of a tank! WAGNER single-component tank sealing resin saves any tank by installing a protective inner tank, so to speak. Even fuel tanks that are already damp or weeping liquid are usually 100% leak proof after sealing!
As opposed to most two-component sealing compounds, WAGNER single-component tank sealing resin does not become brittle and permanently retains a minimum amount of flexibility. This is very important as it means the inner coating bonds reliably even in case of later damage to the tank due to vibrations or minor accidents. In addition, the single-component material hardens slower, therefore giving the user more time to ensure correct sealing and to get the flowing material to 

WAGNER Rust Converter stops corrosion

  • WAGNER Rust Converter stops corrosion immediately; complete derusting is superfluous.
  • It also converts the rust into a non-corrosive metal compound.
  • WAGNER Rust Converter has a very low viscosity so that it penetrates all pores.
  • It forms a dark grey layer, ideal for final protective treatment.
  • Saves time and money, no derusting or sandblasting or priming is necessary.
  • WAGNER Rust Converter should be used only on surfaces that are free of oil and grease.
  • WAGNER Rust Converter is ready for use and easy to apply.
WAGNER Rust Converter stops corrosion immediately; complete derusting is superfl
Related Products
!