The wiring exits the light through the mounting bolt.
Universal Silver Bullets can be installed just about anywhere. They include minimal mounting hardware, but with a little ingenuity, they will fill the bill in applications we don't cover with complete kits. Our P-Clamps and new Fork Clamps work great to attach Silver Bullets to engine guards, frame tubes, or fork tubes.
L.E.D. Silver Bullets
The CAD-designed lenses enhance the already bright L.E.D. output to provide exceptional, jewel-like illumination. If you choose to run them on the rear of your bike, you simply wire the “bright” circuit from the light into your stock turn signal circuit and they will function just as your stock turn signals did. Red L.E.D. Silver Bullets are single circuit and are intended for rear applications as turn signals only. Unless used with our Run-Turn-Brake Controller, P/N 4859. If you intend to use the Rear Run-Turn-Brake controller with your rear mounted L.E.D. Silver Bullets, be sure to order the red version because it is illegal to have amber brake or running lights on the rear of a vehicle. Large L.E.D. Silver Bullets come with colored lenses that match the color of the L.E.D. the L.E.D.s emit the color indicated by the Model Number.
Note: The necessary Load Equalizer is included in each L.E.D. Silver Bullet kit. There is no need to purchase one separately
Important Info on Silver Bullets
• Red L.E.D. Silver Bullets have two wires, power and ground, and are intended to be used only as turn signals unless used with 4859 Run-Turn-Brake Controller.
• Amber L.E.D. Silver Bullets have three wires, low, bright and ground, so they can be wired to operate as running lights and turn signals.
Small Silver Bullets measure 2-1/2" x 1-5/8"
Large Silver Bullets measure 3-1/4" x 2-5/16"
