customcruisers.com

Durable and dependable, the Garmin zūmo 550 is built for motorcycles:

Adjustable cradle that makes mounting larger cell phones, PDA's and MP3 players safe and easy. Includes pin adapter plate needed to mount onto the Z6202 Quick Change Adapter or Z6201 GPS/XM Top Plate.

Holds accessories 2.4 (60mm) to 3.6 (90mm) in. wide. Overall height is 4.1 in. (104mm). 

Adjustable cradle for mounting small cell phone or I-Pod® ( Nano, Mini or standard). This kit may be mounted directly to any standard top plate or to the Z6202 Quick Change Adapter.

Holds accessories from 1.5 in. (40mm) to 2.8 in. (73mm). Overall height is 3.5 in. (89mm). 

GPS MOUNT Accessory Top Plate for mounting a device with the four bolt AMPS bolt pattern used by many GPS and SAT radio manufacturers. Uses rubber expansion nuts to hold device secure and to isolate vibration. Works with Delphi XM Roady, XM Roady II, SkyFi, SkyFi 2, Garmin GPS Cradles, and R.A.M. GPS cradles. Not for mounting any Magellan GPS with nuts built into the back of the unit. (GPS/Radio Not Included). Works with any Ztechnik mount.

Accessory Top Plate for mounting a device with the four bolt AMPS bolt pattern used by many GPS and SAT radio manufacturers. Uses rubber expansion nuts to hold device secure and to isolate vibration. Works with Delphi XM Roady, XM Roady II, SkyFi, SkyFi 2, Garmin GPS Cradles, and R.A.M. GPS cradles. Not for mounting any Magellan GPS with nuts built into the back of the unit. Requires ZTechnik Accessory Mount

Accessory Top Plate for mounting a device with the four bolt AMPS bolt pattern used by many GPS and SAT radio manufacturers. Uses rubber expansion nuts to hold device secure and to isolate vibration. Works with Delphi XM Roady, XM Roady II, SkyFi, SkyFi 2, Garmin GPS Cradles, and R.A.M. GPS cradles. Not for mounting any Magellan GPS with nuts built into the back of the unit.
Colour :Anodized Black 

Note: Mounts to any TechMount platform, available separately

The Z6500 Wide Accessory Top allows for the mounting of larger electronic devices, or two small devices side by side. Will work with any ZTechnik Accessory Mount product.

The TechMount Quick Change Adaptor Plate is an accessory top that makes changing from one device to another quick and easy. Simply mount your GPS or satellite radio to the Quick Change Adaptor with the supplied hardware and slide it onto any standard TechMount top plate. The adaptor is held securely with one stainless thumbscrew from underneath. Simply remove your device when its not needed and use your Adapter Plate for another device. No tools required and no need to change the top plate. Machined from a solid block of high impact ABS, this Adapter Plate is made to withstand the elements. We have pre-drilled several industry standard mounting holes into the accessory top to make mounting your device simple. It has the AMPS four hole pattern used by Garmin, Magellan, Delphi XM and Sirius. It also has the two- and four-hole patterns used for mounting almost all R.A.M. style cradles.(GPS System not included)
Platform: 3.125 in. x 2.50 in.

Requires Ztechnik Accessory mount ZT-Z6131 (Not Included)

GPS Plate extra large CNC ally The Z6200 Wide Accessory Top allows for the mounting of larger electronic devices, or two small devices side by side. Will work with any ZTechnik Accessory Mount product.

Makes mounting the Garmin XM radio antenna simple. This powder coated steel bracket mounts between the GPS cradle and the Techmount top plate. (GPS/Radio Not included)

GPS Mount top plate mount adaptor CNC ally  For mounting GPS or Satellite radio cradles with four square holes onto a Z6202 Quick Change Adapter Plate or Z6201/6501/6601 Accessory Adapter. (GPS/Radio not included)

GPS Top Plate mount For mounting GPS or satellite radio cradles with a single square pin onto a Z6202 Quick Change Adapter Plate or Z6201/6501/6601 Accessory Adapter. (GPS/Radio Not included)

This 22mm handlebar mount gps bracket is a universal clamp system designed for round tube, 7/8 in. diameter handlebars. The mount requires only 1/2 in. of bar space. The ball and socket design used on this mount allows a wide range of movement, making installation at complex angles possible. The top plate can be rotated 360 degrees, as well as offset left,right or centre.every bike form a bandit to a fireblade! or more exotic off roaders or ducati superbikes too!will also work as radar detector mount . See our double top top allow  2 items to be used at once!
Platform: 3 in. x 2.25 in.

R1200GS GPS MOUNT  R1150 Accessory GPS Mount R1100 GPS Mount , but will fit most bikes with 7/8 in. handlebars. Once in place, it blends seamlessly with the OEM styling of your bike. The dual top plates swivel independently. every bike form a bandit to a fireblade! or morte exotic off roaders or ducati superbikes too!will also work as radar detector mount .see our double top top allow  2 items to be used at once!

Platform: (2) 3 in. x 2.25 in.

This ZTechnik Accessory Mount is specially designed for the R1200GS tapered bars, but will fit most bikes with 7/8 in. handlebars. Once in place, it blends seamlessly with the OEM styling of your bike. A compact and versatile mount. Platform: 3 in. x 2.25 in.

This is the most versatile product in the ZTechnik Accessory Mount line. Whether you have an F650, an R1150GS, or even an old airhead boxer, the Z6190 will look good and function properly.
Platform: 3 in. x 2.25 in.

This ZTechnik Accessory Mount features an anodized silver finish that is designed to look correct on your bike. But it will look great and function beautifully on practically any bike with 7/8 in. handlebars.
Platform: 3 in. x 2.25 in.

The Z6111 ZTechnik Accessory Mount is specially designed for the R1200C, but will work on any bike with 1 in. handlebars. Riders enjoy a convenient spot to mount accessories while preserving a clean, uncluttered look.
Platform: 3 in. x 2.25 in.

This ZTechnik Accessory Mount is specially designed for the BMW R1200CL or R1200C 1 1/8 " bars , but will fit most bikes with 1 1/8 in. handlebars. Once in place, it blends seamlessly with the OEM styling of your bike. A compact and versatile mount. Platform: 3 in. x 2.25 in.

The Z6110 will look great on an R1200C/CL, R1200C Euro, Phoenix, Montauk, or any bike with 1 1/8 in. handlebars. Riders enjoy a convenient spot to mount accessories while preserving a clean, uncluttered look.

This mount works perfectly on the R1150RT, R1100S, K1200LT and the 2006 and later K1200GT. The mount slides into the existing, unused mirror holes on the handlebars. Once in place, the ZTechnik Accessory Mount will look like it came stock on the bike.

The TechMount Control Mount System is a compact mount that attaches to the handlebar control's vertical pinch bolts. This system is designed specifically for the BMW K1200R, K1200S, R1200GS and the R1200S. It will also work on the new F800S and ST.

This ZTechnik Accessory Mount will work on any bike with 7/8 in. handlebars. Riders enjoy a convenient spot to mount accessories while preserving a clean, uncluttered look.

Platform: 3 in. x 2.25 in.

material : 6061 T6 Aluminum and Stainless Steel -Bright Chrome plated