customcruisers.com

BMW R Series CL Accessories

Scala Rider Helmet Headset Cardo Headset not the older models-latest specs

Now Only

Scala Rider Head Set

Cardo Q2 plus MP3 input not the older models-latest specs at a GREAT Price -Hands Free Mobile Phone Headset & more plus Intercom LATEST SPEC PLUS new MP3 / ipod interface lead INCLUDED!!!

New Q2 Version PLUS MP3 Input - not to be confused with older models this fiull 2009 specs!! appears cheaper on ebay- but not this latest model! NOW with 4 bluetooth connections possible at same time ie GPS Phone Pillion and another Bike or just GPS and 3 bikes for great touring possibilities all contained in one compact unit that clips to the helmet and is quick release for easy charging in supplied charger you cannot go wrong this even has a built in FM stereo !! the equivalent from Autocomm etc with 4 bluetooth capabilities would cost over £750!! and still not be as compact or wireless! get rid of your old bulky hard wired system and invest in these before the price goes up!!

Hands Free Mobile Phone Headset & Rider to Pillion Intercom plus 2 other blue tooth devices as well !
Weather protected headset- fits open faced and full helmets quick release mount included for open or full face helmets !

Full stereo twin speakers in the helmet plus boom microphone with noise reducing wind sock- made by one of military biggest legendary suppliers- need we say more! latest technology guaranteed!

**************** NOTE 2 are needed for 2 people this is one item not a pair *************

-Self-Installation of entire system within minutes, leaving no traces on helmet
-Upto 7 hours talk time/ 1 week Standby (recharging from any normal output) cigar lighter lead available plus MP3 / Ipod to FM signal allows you to listen to your Itunes etc too- via the fm radio.(Optional extra ) call us for details-=please note the ipod/MP3 lead is included free of charge.

-Hands Free Mobile Phone Headset & Rider to Pillion Intercom
Weather protected headset- fits open faced and full helmets
-Self-Installation of entire system within minutes, leaving no traces on helmet
-Upto 7 hours talk time/ 1 week Standby (recharging from any normal output)

ZTechnik Rear Seat Storage Bag/Carrier

Larger picture

ZTechnik’s extremely versatile 4-liter rear storage compartment is a great addition or alternative to the standard tank bag. Besides its cavernous main compartment, four zippered storage areas (three main areas and one document holder) are attached to a cleverly designed, removable tray. A Velcro® hinge makes removal of the tray a snap.Sturdy double zippers keep everything secured inside while the pod’s web straps and rubber coated hooks attach it to the bike. Thinking ahead, ZTechnik included plenty of length in the web straps to make mounting the bag – under
the seat, to the rear tail cowling, or through a rack– an easy process.. Web straps have vinyl coated hooks to prevent sratching or scuffing your motorcycle's finish. Dimesions: H: 4.5-6 in. W: 9-12.5 in. L:13.75 in.

ZTechnik Helmet Lock License Plate Frame -

Larger picture

Helmet lock kit from Ztechnik Z5505 made from top qual;ity alloy with twin helmet locks.

Finding a convenient place to store your helmet can be a problem with some bikes. That's why we developed this system to be placed in a very accessible location. When mounted, the frame will hold and lock two helmets using a push-lock locking mechanism that comes with 2 matching keys.

BMW R1200CL - ZTechnik Accessory Mount; BMW Mirror Mount, anodized Black

Larger picture

This mount works perfectly on the R1150RT, R1100S, K1200LT and the 2006 and later K1200GT. The mount slides into the existing, unused mirror holes on the handlebars. Once in place, the ZTechnik Accessory Mount will look like it came stock on the bike.

BMW R1200CL - Tech Mount, Handlebar mount 1 1/8", Chrome

Larger picture

The Z6110 will look great on an R1200C/CL, R1200C Euro, Phoenix, Montauk, or any bike with 1 1/8 in. handlebars. Riders enjoy a convenient spot to mount accessories while preserving a clean, uncluttered look.

ZTechnik Accessory Mount; 7/8 in. Handlebar Mount, Anodized Silver

Larger picture

This ZTechnik Accessory Mount features an anodized silver finish that is designed to look correct on your bike. But it will look great and function beautifully on practically any bike with 7/8 in. handlebars.
Platform: 3 in. x 2.25 in.

ZTechnik Accessory Mount; 7/8 in. Handlebar Mount, Anodized Black

Larger picture

This is the most versatile product in the ZTechnik Accessory Mount line. Whether you have an F650, an R1150GS, or even an old airhead boxer, the Z6190 will look good and function properly.
Platform: 3 in. x 2.25 in.

ZTechnik Accessory Mount; 7/8 in. Handlebar Mount; Double Top Plates, Anodized Black

Larger picture

This ZTechnik Accessory Mount is specially designed for the R1100/1150/1200GS, but will fit most bikes with 7/8 in. handlebars. Once in place, it blends seamlessly with the OEM styling of your bike. The dual top plates swivel independently. Platform: (2) 3 in. x 2.25 in.

ZTechnik Accessory Mount; 7/8 in. Handlebar Mount, Black

Larger picture

This ZTechnik Accessory Mount is specially designed for the R1200GS tapered bars, but will fit most bikes with 7/8 in. handlebars. Once in place, it blends seamlessly with the OEM styling of your bike. A compact and versatile mount. Platform: 3 in. x 2.25 in.

ZTechnik Wide Accessory Top, anodized Black

Larger picture

GPS Mount top plate wide fitting Ztechnik double accessory model cnc ally construction

GPS Plate extra large CNC ally The Z6200 Wide Accessory Top allows for the mounting of larger electronic devices, or two small devices side by side. Will work with any ZTechnik Accessory Mount product.

Ztechnik Small GPS/XM Accessory Top Plate, Black

Larger picture

Accessory Top Plate for mounting a device with the four bolt AMPS bolt pattern used by many GPS and SAT radio manufacturers. Uses rubber expansion nuts to hold device secure and to isolate vibration. Works with Delphi XM Roady, XM Roady II, SkyFi, SkyFi 2, Garmin GPS Cradles, and R.A.M. GPS cradles. Not for mounting any Magellan GPS with nuts built into the back of the unit.
Colour :Anodized Black

Note: Mounts to any TechMount platform, available separately

ZTechnik Quick Change Adaptor Plate

Larger picture

The TechMount Quick Change Adaptor Plate is an accessory top that makes changing from one device to another quick and easy. Simply mount your GPS or satellite radio to the Quick Change Adaptor with the supplied hardware and slide it onto any standard TechMount top plate. The adaptor is held securely with one stainless thumbscrew from underneath. Simply remove your device when its not needed and use your Adapter Plate for another device. No tools required and no need to change the top plate. Machined from a solid block of high impact ABS, this Adapter Plate is made to withstand the elements. We have pre-drilled several industry standard mounting holes into the accessory top to make mounting your device simple. It has the AMPS four hole pattern used by Garmin, Magellan, Delphi XM and Sirius. It also has the two- and four-hole patterns used for mounting almost all R.A.M. style cradles.(GPS System not included)
Platform: 3.125 in. x 2.50 in.

Requires Ztechnik Accessory mount ZT-Z6131 (Not Included)

Ztechnik Large Cell Phone/PDA/MP3 Holder

Larger picture

New GPS Mountable mobile phone or MP3 palyer holder this is our larger one see our other product for the smaller one plus the double top ( allows 2 items to be used with one GPS mount) or the latest quick release snatch plates adaptable to any items !! allows swopping from vehicle to bike etc .

Adjustable cradle that makes mounting larger cell phones, PDA's and MP3 players safe and easy. Includes pin adapter plate needed to mount onto the Z6202 Quick Change Adapter or Z6201 GPS/XM Top Plate.

Holds accessories 2.4 (60mm) to 3.6 (90mm) in. wide. Overall height is 4.1 in. (104mm).

Ztechnik Small Cell Phone/MP3 Holder

Larger picture

GPS mountable phone or small mp3 player holder see our other items ie dual mount top plate (allows 2 items to be fitted to 1 gps mount) or quick release snatch plate for gps- move you item form vehicle to bike etc

Adjustable cradle for mounting small cell phone or I-Pod® ( Nano, Mini or standard). This kit may be mounted directly to any standard top plate or to the Z6202 Quick Change Adapter.

Holds accessories from 1.5 in. (40mm) to 2.8 in. (73mm). Overall height is 3.5 in. (89mm).

ZTechnik Single Pin Accessory Adaptor, Black

Larger picture

GPS Top Plate mount square pin pattern |CNC ally - not plastic.

GPS Top Plate mount For mounting GPS or satellite radio cradles with a single square pin onto a Z6202 Quick Change Adapter Plate or Z6201/6501/6601 Accessory Adapter. (GPS/Radio Not included)

ZTechnik Four-Pin Accessory Adaptor, Black

Larger picture

GPS Mount top plate mount adaptor CNC top quality

GPS Mount top plate mount adaptor CNC ally For mounting GPS or Satellite radio cradles with four square holes onto a Z6202 Quick Change Adapter Plate or Z6201/6501/6601 Accessory Adapter. (GPS/Radio not included)

ZTechnik Satellite Radio Antenna Mount, Black

Larger picture

Pre-drilled to mount onto any standard TechMount top plate or Z6202 Quick Change Adapter Plate. This bracket provides a secure and compact place to attach your XM radio antenna.(radio not Included)

ZTechnik Garmin® XM Antenna Mount, Black

Larger picture

Makes mounting the Garmin XM radio antenna simple. This powder coated steel bracket mounts between the GPS cradle and the Techmount top plate. (GPS/Radio Not included)

BMW R1200CL - Small GPS/XM Accessory Top Plate, Chrome

Larger picture

BMW R1200CL - Gauge Panel, Burlwood

Larger picture

Add the dark rich luster of Burlwood to the dash and radio panels of your R 1200 CL. Genuine Burlwood capped for protection with a durable poured resin topcoat. Each set is precision cut with smooth radius edges for a clean fit onto the panels of the R 1200 CL.

BMW R1200CL - Gauge Panel, Carbon Fibre

Larger picture

Genuine carbon fibre cloth comes alive under a crystal clear poured resin topcoat. ZTechnik's close attention to precision fit will ensure easy installation.

BMW R1200CL - Radio Panel, Burlwood

Larger picture

BMW R1200CL - Radio Panel, Carbon Fibre

Larger picture

Genuine carbon fibre cloth comes alive under a crystal clear poured resin topcoat. ZTechnik's close attention to precision fit will ensure easy installation.

BMW R1200CL - Trunk Rack

Larger picture

Brazed steel tube construction finished in high quality bright chrome. Built in LED brake light, integrated bungee hangers for secure storage of gear.integrated

Kuryakyn Master Blaster Bike Dryer

Larger picture

Kuryakyn Master Blaster Bike Dryer Master Blaster from Metro great fro drying your vehicle !! no more arm ache or chamois to buy no streaking-

Kuryakyn Master Blaster Bike Dryer Master Blaster from Metro great fro drying your vehicle !! no more arm ache or chamois to buy no streaking- Blast water off your bike or anything wet with this high-speed, 4 H.P. motors) dryer of sturdy, all-steel construction. Features 2 stage dual fan with two speeds and two temperatures. A 10" by 1.5" inch commercial-strength flexible hose makes it easy to dry wet things quickly and re-direct moisture out of crevices. Weighs 16 lbs.

Kuryakyn Air Force Blaster Bike Dryer

Larger picture

Air Force Blaster Bike Dryer motorcycle air blaster Kuryakyn Air Force Blaster Bike Dryer greast for drying your bike car etc no water marks!! or chamois arm ache!

Air Force Blaster Bike Dryer motorcycle air blaster Kuryakyn Air Force Blaster Bike Dryer greast for drying your bike car etc no water marks!! or chamois arm ache! The Air Force Blaster with its 4 peak H.P. motor and 2-stage dual fan provides a super high velocity, mildly heated air column that cuts drying time by approximately 75%. A variety of interchangeable tips allow you to control the air velocity for drying large expansive areas like tour trunks and saddlebags, or tight nooks, crannies and "rust magnets" like the heads of Allen head bolts. A long flexible hose, and super tough insulated cord provide ample mobility to maneuver around the bike. This high tech blower keeps washing and drying your ride from being an all afternoon ordeal.

Kuryakyn Air Force Blaster Sidekick Bike Dryer

Larger picture

Kuryakyn Air Force Blaster Sidekick Bike Dryer Air Force Blaster Sidekick from Metro

Kuryakyn Air Force Blaster Sidekick Bike Dryer The SideKick is a compact, powerful hand held motorcycle dryer that is small enough to put into a saddle bag yet strong enough to dry a bike off in minutes! No more water spots or streaking!
At just over 3 pounds, the all steel SideKick's 1.3 H.P. motor produces a large volume of warm filtered air and is great when at home or on the road.

Shopping cart by ShopFactory